RIIMPO319D - Conduct backhoe/loader operations
Duration
1 day for training and assessment
3 - 4 hours for experienced operators, assessment only
Outline
This unit covers the conducting of backhoe/loader operations in the mining, extractive and civil construction industry. It includes, planning and preparing; conducting machine pre-operational checks; operating backhoe/ loaders; lifting, carrying and placing materials; selecting, removing and fitting attachments; carrying out machine operator maintenance; and cleaning up.
Areas of Study
• Relevant Australian Standards, Legislation and Regulations
• OH&S policy
• Codes of Practice
• Manufacturers’ specifications and instructions
• Risk assessment and hazards
• Backhoe and loader attachments
• Conduct routine checks and plan work
• Safe Operations
• Shift load
• Shut down equipment and secure site
Assessment
Written and practical assessments
Prerequisites
Photo Identification
Must possess reasonable reading and writing skills
RIIHAN309D -Conduct telescopic materials handler operations
Duration
1 day for training and assessment
3 - 4 hours for experienced operators, assessment only
Outline
This unit covers conducting telescopic materials handlerin the resources and infrastructure industries. It includes planning and preparing for operations; operating the telescopic materials handler; and carrying out post-operational procedures.
Areas of Study
• Introduction and Legislation
• OHS Regulations and Act
• Inspection of equipment
• Plan & prepare operations
• Inspect & prepare work area
• Equipment & attachments
• Pre start checks
• Operating techniques
• Response to hazards and emergency situations
• Operational maintenance
Assessment
Written and practical assessments
Prerequisites
Photo Identification
Must possess reasonable reading and writing skills
RIIMPO316D - Conduct self-propelled compactor operations
Duration
1 day for training and assessment
3 - 4 hours for experienced operators, assessment only
Outline
This unit covers conducting self-propelled compactoroperations in the mining, extractive and civil construction industries. It includes planning and preparing for operations; operating the self-propelled compactor; and carrying out post-operational procedures.
Areas of Study
• Introduction and Legislation
• OHS Regulations and Act
• Inspection of equipment
• Plan & prepare operations
• Inspect & prepare work area
• Equipment & attachments
• Pre start checks
• Operating techniques
• Response to hazards and emergency situations
• Operational maintenance
Assessment
Written and practical assessments
Prerequisites
Photo Identification
Must possess reasonable reading and writing skills
RIIMPO317D - Conduct roller operations
Duration
1 day for training and assessment
3 - 4 hours for experienced operators, assessment only
Outline
This unit covers conducting rolleroperations in the mining, extractive and civil construction industries. It includes planning and preparing for operations; operating the roller; and carrying out post-operational procedures.
Areas of Study
• Introduction and Legislation
• OHS Regulations and Act
• Inspection of equipment
• Plan & prepare operations
• Inspect & prepare work area
• Equipment & attachments
• Pre start checks
• Operating techniques
• Response to hazards and emergency situations
• Operational maintenance
Assessment
Written and practical assessments
Prerequisites
Photo Identification
Must possess reasonable reading and writing skills
RIIMPO337D Conduct articulated haul truck operations and RIIMPO338D Conduct rigid haul truck operations
Duration
1 day for training and assessment
3 - 4 hours for experienced operators, assessment only
Outline
This unit covers conducting haul truckoperations in the mining, extractive and civil construction industries. It includes planning and preparing for operations; operating the haul truck; and carrying out post-operational procedures.
Areas of Study
• Introduction and Legislation
• OHS Regulations and Act
• Inspection of equipment
• Plan & prepare operations
• Inspect & prepare work area
• Equipment & attachments
• Pre start checks
• Operating techniques
• Response to hazards and emergency situations
• Operational maintenance
Assessment
Written and practical assessments
Prerequisites
Photo Identification
Must possess reasonable reading and writing skills
Loads and Slings safety awareness
Duration
1/2 day for training
Outline
This training covers an awareness of safety using slings around loads in a practical and safe environment.
Areas of Study
• OHS Regulations and Act
• Inspection of equipment
• Inspect & prepare work area
• Equipment & attachments
• Response to hazards and emergency situations
Assessment
Observation during practical training
Prerequisites
Must possess reasonable reading and writing skills
TLID1001A - Shift materials safely using manual handling methods
Duration
1 day for training and assessment
Outline
This unit involves the skills and knowledge required to shift loads using manual handling methods, including assessing the risks associated with relocating the load, planning the relocation process and carrying out the relocation in accordance with the plan. Licensing, legislative, regulatory or certification requirements are applicable to this unit.
Areas of Study
• OHS Regulations and Act
• Assess risks with relocation of the load
• Plan load relocation
• Relocate load
Assessment
Written and practical assessments
Prerequisites
Photo Identification Must possess reasonable reading and writing skills
AHCMOM211A - Operate side by side utility vehicles
Duration
1 day for training and assessment
3 - 4 hours for experienced operators, assessment only
Outline
This unit covers the operation of side by side utility vehicles and defines the standard required to: conduct pre and post operational checks; operate side by side utility vehicles in a safe, efficient and controlled manner; perform minor maintenance and fault finding.
Areas of Study
• Introduction and Legislation
• OHS Regulations and Act
• Inspection of equipment
• Plan & prepare operations
• Inspect & prepare work area
• Equipment & attachments
• Pre start checks
• Operating techniques
• Response to hazards and emergency situations
• Operational maintenance
Assessment
Written and practical assessments
Prerequisites
Photo Identification
Must possess reasonable reading and writing skills
AHCMOM212A - Operate quad bikes
Duration
1 day for training and assessment
3 - 4 hours for experienced operators, assessment only
Outline
This unit covers the process of maintaining and operating quad bikes (four wheeled), and defines the standard required to: perform routine pre-operational checks and maintenance; match, attach and operate equipment as described in the manufacturer's operators manual; recognise and control hazards and risks; safely operate quad bikes in a range of weather and terrain conditions; monitor and maintain vehicle records.
Areas of Study
• Introduction and Legislation
• OHS Regulations and Act
• Inspection of equipment
• Plan & prepare operations
• Inspect & prepare work area
• Equipment & attachments
• Pre start checks
• Operating techniques
• Response to hazards and emergency situations
• Operational maintenance
Assessment
Written and practical assessments
Prerequisites
Photo Identification
Must possess reasonable reading and writing skills
RIIWHS205D - Control traffic with stop-slow bat
Duration
Full day Course. Approx 8 hours
Outline
This course provides the skills and competencies required to control traffic on public
roads and construction sites for the protection of site workers and the general public.
This course is the minimum standard required, to meet VicRoads requirements.
Areas of Study
During the training program, participants will cover:
• Plan and prepare work site
• OH&S / Safety
• Signage requirements
• Co-ordinate and direct traffic
• Radio Communication
• Clean and close site
Assessment
There are three forms of assessment required in order to gain competency is this unit:
• Successfully complete of session work book to assess general knowledge
• Successfully complete assessment of skills and abilities during a practical demonstration
• Undergo a site audit once the participant has completed 3 entries in the provided logbook, within 6 months of completing the training course
Prerequisites
Photo Identification
Must possess reasonable reading and writing skills
RIIWHS302D - Implement traffic management plan
Duration
Full Day Course. Approx 8 hours
Outline
This course provides the skills and competencies required to manage traffic on public roads and
around or through construction sites by implementing traffic management plans that minimize the
risk to public and site workers. Work includes setting up, checking, removing and maintenance of
roadwork safety measures (sign schemes) to comply with the requirements of Traffic Management
Areas of Study
During the training program, participants will cover:
- Plan and prepare to implement traffic management plans
- Maintain worksite safety
- Setup signage scheme
- Monitor traffic flow
- Close down at end of shift
- Close down at end of Traffic management plan
Assessment
There are three forms of assessment required in order to gain competency is this unit:
- Successfully complete of session work book to assess general knowledge.
Successful completion of the above unit will provide the participant with a probationary licence. To complete the full qualification requirements, participants must;
- Undergo a site audit once the participant has completed 3 entries in the provided logbook, within 6 months of completing the training course.
- The audit will be conducted on a site that the candidate has implemented and they must provide documentation to prove this (ie TMP, JSA, SWMS and checklists).
Once the participant has successfully completed all three assessment requirements, an ID card will be issued in recognition of competence.
Prerequisites
Evidence of successful completion of the pre-requisite unit riiwhs302d or equivalent Worksite traffic Audits
